Call 07943441242

94% Response rate

LCR Resistance Meter

Pioneers in the industry, we offer hioki im3533 lcr meter, hioki 3506-10 c meter, hioki im3523 lcr meter, hioki l2001 pincher probe, hioki im3536 lcr meter and hioki im3570 impedance analyzer from India.

Hioki IM3533 LCR Meter

Get Best Quote
  • Foil Print
Request Callback

₹ 313000 / Piece Get Latest Price

Product Brochure
Usage/ApplicationLaboratory
Model Name/NumberIM3533
BrandHIOKI
Power Source100 to 240 V AC, 50/60 Hz, 50 VA max
Dimension330 mm (12.99 in) W x 119 mm (4.69 in) H x 168 mm (6.61 in) D, 3.1 kg (109.3 oz)
Voltage240 V
Measurement Display RangeZ, Y, Rs, Rp, Rdc, X, G, B, Ls, Lp, Cs, Cp : +- (0.00000 [unit] to 9.99999G [unit]) Real value displa
Measurement modesLCR
Measurement time2 ms

Minimum order quantity: 1 Piece

Hioki LCR Meters and Impedance Analyzers range from 1 mHz to 3 GHz devices to suit a wide range of applications in the testing of electronic components. The IM3533 series are Hioki’s first LCR meters to offer turn ratio, mutual inductance and inductance difference measurements of transformers and coils, and are integrated with an internal DC bias to facilitate HDMI compliance testing.
  • ±0.05% accuracy with wide measurement range
    (DC, 1mHz to 200kHz, 5mV to 5V, 10uA to 50mA)
  • Non-stop testing over mixed measurement conditions such as C-D and ESR at 10 times the speed of previous models
  • Built-in low impedance high precision mode effective for testing low inductance or the ESR of aluminum electrolysis capacitance
  • Dedicated modes for measuring transformer winding ratio, mutual inductance and temperature compensated DCR
  • Frequency sweep testing (IM3533-01 only)
  • 2m/4m cable setting in addition to the standard 0m/1m
  • Touch screen with intuitive operation
IM3533 IM3533-01
Measurement modes LCR (Measurement with single condition), Transformer testing (N, M, ΔL), Continuous testing(Continuous measurement under saved conditions) (LCR mode) LCR (Measurement with single condition), Transformer testing (N, M, ΔL), Analyzer (sweep testing), Continuous Testing (LCR/Analyzer mode)
Measurement parameters Z, Y, θ, X, G, B, Q, Rdc (DC resistance), Rs (ESR), Rp, Ls, Lp, Cs, Cp, D (tanδ), N, M, ΔL, T
Measurement range 100 mΩ to 100 MΩ, 10 ranges (All parameters defined in terms of Z.)
Displayable range Z, Y, Rs, Rp, Rdc, X, G, B, Ls, Lp, Cs, Cp : ± (0.00000 [unit] to 9.99999G [unit]) Real value display for Z and Y only
θ: ± (0.000° to 180.000°), D: ± (0.00000 to 9.99999)
Q: ± (0.00 to 99999.9), Δ%: ± (0.0000% to 999.999%), T: -10.0°C to 99.9°C
Basic accuracy Z : ±0.05% rdg. θ: ±0.03°
Measurement frequency 1 mHz to 200 kHz (5 digits setting resolution, minimum resolution 1 mHz)
Measurement signal level [Normal mode]
V mode, CV mode: 5 mV to 5 Vrms, 1 mVrms steps
CC mode: 10 μA to 50 mArms, 10 μArms steps
[Low impedance high accuracy mode]
V mode, CV mode: 5 mV to 2.5 Vrms, 1 mVrms steps
CC mode: 10 μA to 100 mArms, 10 μArms steps
Output impedance Normal mode: 100 Ω, Low impedance high accuracy mode: 25 Ω
Display 5.7-inch touch-screen color TFT, display can be set to ON/OFF
Measurement time 2 ms (1 kHz, FAST, display OFF, representative value)
Functions DC bias measurement, DC resistance temperature compensation (converted reference temperature display), Comparator, BIN measurement (classify function), Panel loading/saving, Memory function
Interfaces EXT I/O (Handler), USB communication (high-speed), USB memory
Optional: Choose 1 from RS-232C, GP-IB, or LAN
Power supply 100 to 240 V AC, 50/60 Hz, 50 VA max
Dimensions and mass 330 mm (12.99 in) W × 119 mm (4.69 in) H × 168 mm (6.61 in) D, 3.1 kg (109.3 oz)
Included accessories Power cord × 1, Instruction manual × 1, CD-R (Includes PC commands and sample software) × 1
Yes! I am interested

Hioki 3506-10 C Meter

Get Best Quote
Request Callback

₹ 4590 / Piece Get Latest Price

Product Brochure
Cable Length1.5 m
Connector TypeType C to Type C
ColorWhite
Model Name/Number3506-10
Included accessoriesPower cord x 1, Instruction manual x 1, Spare fuse x 1
Measurement signal level500 mV
DisplayLED
Dimension260x100x298 mm

Minimum order quantity: 1 Piece

Hioki LCR Meters and Impedance Analyzers range from 1mHz to 3GHz devices to suit a wide range of applications in the testing of electronic components. The 3506-10 is a dual-band capacitance meter designed to be integrated with automatic taping machines and sorters for production of MLCC (multi-layer ceramic capacitors).
  • High-speed analog test time of 0.6 ms (at 1 MHz)
  • Improved noise resistance and enhanced repeatability in measurement precision even for production lines
  • 1 kHz and 1 MHz measurement frequency supports stable low capacitance testing with taping machines
  • BIN function, for easy component screening
Yes! I am interested

Hioki IM3523 LCR Meter

Get Best Quote
Request Callback

₹ 186000 / Piece Get Latest Price

Product Brochure
Usage/ApplicationLaboratory
Model Name/NumberIM3523
BrandHIOKI
ColorWhite
Power SourceElectric
Dimension260x88x203 mm
Voltage100 to 240 V AC, 50/60 Hz, 50 VA max
Power supply100 to 240 V AC, 50/60 Hz, 50 VA max

Minimum order quantity: 1 Piece

Hioki LCR Meters and Impedance Analyzers range from 1 mHz to 3 GHz devices to suit a wide range of applications in the testing of electronic components. The IM3523 is designed for basic measurement on production lines so that it can be offered at a low price point, and delivers improved measurement reliability thanks to its contact check function.
  • ±0.05% accuracy with wide measurement range (DC, 40Hz to 200kHz, 5mV to 5V, 10uA to 50mA)
  • Rapid 2 msec test time
  • Built-in comparator and BIN functions
  • Non-stop testing over mixed measurement conditions such as C-D(120 Hz) and ESR(100 kHz) at 10 times the speed of previous models (compared with Model 3532-50)
Yes! I am interested

Hioki L2001 Pincher Probe

Get Best Quote
Request Callback

₹ 5300 / Piece Get Latest Price

Product Brochure
Size6 Inch
BrandHioki
Frequency8 MHZ
Overall Length8 Inch
Usage/ApplicationPlumbing
Warranty1 Year
Connection cable length73 cm
Included accessoriesInstruction manual x1, open correction jig x1, CONTACT TIPS IM9901 (fixed standard with 4 screws)

Minimum order quantity: 1 Piece

The L2001 Pincher Probe can be connected directly to measurement terminals on Hioki LCR meters, impedance analyzers, and Capacitance HiTesters. Among the targets it can measure are chip components. Each of the arm tips features a two-terminal design.
Yes! I am interested

Hioki IM3536 LCR Meter

Get Best Quote
  • Foil Print
Request Callback

₹ 390000 / Piece Get Latest Price

Product Brochure
Usage/ApplicationLaboratory
Model Name/NumberIM3536
ColorWhite
Power SourceElectric
Dimension300x119x230 mm
Voltage240 V
Measurement modesLCR Mode

Minimum order quantity: 1 Piece

Hioki LCR Meters and Impedance Analyzers range from 1mHz to 3GHz devices to suit a wide range of applications in the testing of electronic components. The IM3536 raises the industry standard for general-purpose LCR meters by offering a wide DC and 4 Hz to 8 MHz (*1) testing frequency while delivering 0.05% accuracy, ideal for evaluating the characteristics of next generation electronic components, including power supply inductors thanks to the instrument’s maximum measurement frequency of 8 MHz (*1).
https://youtu.be/thkRD8XzXy0
Yes! I am interested

Hioki IM3570 Impedance Analyzer

Get Best Quote
  • Foil Print
Request Callback

₹ 720000 / Piece Get Latest Price

Product Brochure
Usage/ApplicationLaboratory Use
Model Name/NumberIM3570
BrandHIOKI
Measurement modesLCR mode
Measurement frequency5 MHZ
Display5.7-inch color TFT, display can be set to ON/OFF
Power supply264 VAC
Dimensions300x119x207 mm

Minimum order quantity: 1 Piece

Hioki LCR Meters and Impedance Analyzers range from 1mHz to 3GHz devices to suit a wide range of applications in the testing of electronic components. The IM3570 is ideal for use in applications requiring low-ESR measurement on the order of several milliohms, for example testing of functional polymer capacitors, due to its superior low-impedance repeatability.
Yes! I am interested

Hioki IM3590 Chemical Impedance Analyzer

Get Best Quote
  • Foil Print
Request Callback

₹ 683782 / Piece Get Latest Price

Product Brochure
Usage/ApplicationLaboratory Use
Model Name/NumberIM3590
BrandHIOKI
Measurement range10 ranges
Measurement frequency200 kHz
Display5.7 colour
InterfacesUSB communication
Dimensions300x119x168 mm

Minimum order quantity: 1 Piece

Hioki LCR Meters and Impedance Analyzers range from 1 mHz to 3 GHz devices to suit a wide range of applications in the testing of electronic components. The IM3590 impedance analyzer is an advanced component tester especially suited to electrochemical impedance measurements and includes a variety of graphing functions that are needed for battery and chemical material testing.
  • Broad 1 mHz to 200 kHz signal source range supports measurements of ion behavior and solution resistance
  • Continuous measuring and high-speed testing of LCR and sweep measurements with a single instrument
  • Measure internal impedance of batteries with no load
  • Perform high-speed sweep measurements in as little as 2 ms
  • Basic accuracy of ±0.05% is ideal for applications from component testing to R&D
  • Measure LCR impedance for Cole-Cole plots and equivalent-circuit analyses of electro-chemical components and materials
Measurement modes LCR mode, Continuous measurement mode (LCR mode / Analyzer mode), Analyzer mode (Sweeps with measurement frequency and measurement level, temperature characteristics, equivalent circuit analysis)
Measurement parameters Z, Y, θ, Rs (ESR), Rp, Rdc (DC resistance), X, G, B, Cs, Cp, Ls, Lp,
D (tanδ), Q, T, σ (conductivity), ε (dielectric constant)
Measurement range 100 mΩ to 100 MΩ, 10 ranges (All parameters are determined according to Z)
Display range Z, Y, Rs, Rp, Rdc, X, G, B, Ls, Lp, Cs, Cp, σ, ε :
±(0.00000 [unit] to 9.99999G [unit], Absolute value display for Z and Y only
θ : ±(0.000° to 180.000°), D : ±(0.00000 to 9.99999)
Q : ±(0.00 to 99999.9), Δ % : ±(0.0000% to 999.999%)
T : -10.0°C to 99.9°C
σ, ε :±(0.00000f [unit] to 999.999G [unit]
Basic accuracy Z: ±0.05% rdg. θ: ±0.03°
Measurement frequency 1 mHz to 200 kHz (5 digits setting resolution, minimum resolution 1 mHz)
Measurement signal level Normal mode:
V mode/CV mode: 5 mV to 5 Vrms, 1 mVrms steps
CC mode: 10 μA to 50 mArms, 10 μArms steps
Low impedance high accuracy mode:
V mode/CV mode: 5 mV to 2.5 Vrms, 1 mVrms steps
CC mode:10 μA to 100 mArms, 10 μArms steps
Output impedance Normal mode: 100 Ω, Low impedance high accuracy mode: 25 Ω
Display 5.7-inch color TFT, display can be set to ON/OFF
Measurement time 2 ms (1 kHz, FAST, display OFF, representative value)
Functions DC bias measurement, DC resistance temperature compensation (converted reference temperature is displayed), Temperature measurement, Battery mesurement (Automatic DC biasing system), Comparator, BIN measurement (classification), Panel loading/saving, Memory function
Interfaces EXT I/O (Handler), USB communication (high-speed), USB memory
Optional: Choose 1 from RS-232C, GP-IB, or LAN
Power supply 100 to 240 V AC, 50/60 Hz, 50 VA max.
Dimensions and mass 330 mm (12.99 in) W × 119 mm (4.69 in) H × 168 mm (6.61 in) D, 3.1 kg (109.3 oz)
Included accessories Power cord ×1, Instruction manual ×1, CD-R (Communication instruction manual and sample software [Communications control, accuracy calculation, and screen capture functionality] ) ×1
Yes! I am interested

Hioki IM7583 Impedance Analyzer

Get Best Quote
  • Foil Print
Request Callback

₹ 1600000 / Piece Get Latest Price

Product Brochure
Usage/ApplicationLaboratory Use
Measurement modesLCR mode
Measurable range100
Measurement frequency1 MHz
Display.4-inch color TFT with touch screen
Power supply240 V AC

Minimum order quantity: 1 Piece

Hioki LCR Meters and Impedance Analyzers range from 1 mHz to 3 GHz devices to suit a wide range of applications in the testing of electronic components. The IM7583 offers a top measurement time of 0.5 ms over a 1 MHz to 600 MHz frequency range, making it ideal for high volume production of ferrite chip beads and chip inductors.
  • 1 MHz to 600 MHz testing source frequency
  • Fastest test speed of 0.5 msec (Analog measurement time)
  • ±0.65% rdg. basic accuracy
  • RF I-V method
  • Half-rack size body and palm-sized test head
  • Comprehensive contact check (via DCR testing, Hi-Z reject or waveform judgment)
  • Make frequency sweeps, level sweeps and time interval measurements in Analyzer Mode
  • Measurement modes LCR mode, Analyzer mode (Sweeps with measurement frequency and measurement level), Continuous measurement mode
    Measurement parameters Z, Y, θ, Rs (ESR), Rp, X, G, B, Cs, Cp, Ls, Lp, D (tanδ), Q
    Measurable range 100 mΩ to 5 kΩ
    Display range Z: 0.00 m to 9.99999 GΩ / Rs, Rp, X: ± (0.00 m to 9.99999 GΩ)
    Ls, Lp: ± (0.00000 n to 9.99999 GH) / Q: ± (0.00 to 9999.99)
    θ: ± (0.000° to 180.000°), Cs, Cp: ± (0.00000 p to 9.99999 GF)
    D: ± (0.00000 to 9.99999), Y: (0.000 n to 9.99999 GS)
    G, B: ± (0.000 n to 9.99999 GS), Δ%: ± (0.000 % to 999.999 %)
    Basic accuracy Z: ±0.65 % rdg. θ: ±0.38°
    Measurement frequency 1 MHz to 600 MHz (100 kHz setting resolution)
    Measurement signal level Power: -40.0 dBm to +1.0 dBm
    Voltage: 4 mV to 502 mVrms
    Current: 0.09 mA to 10.04 mArms
    Output impedance 50 Ω (at 10 MHz)
    Display 8.4-inch color TFT with touch screen
    Measurement speeds FAST: 0.5 ms (Analog measurement time, typical value)
    Functions Contact check, Comparator, BIN measurement (classification), Panel loading/saving, Memory function, Equivalent circuit analysis, Correlation compensation
    Interfaces EXT I/O (Handler), USB communication, USB memory, LAN, RS-232C (optional), GP-IB (optional)
    Power supply 100 to 240 V AC, 50/60 Hz, 70 VA max.
    Dimensions and mass Main unit: 215 mm (8.46 in) W × 200 mm (7.87 in) H × 348 mm (13.70 in) D, 8.0 kg (282.2 oz)
    Test head: 90 mm (3.54 in) W × 64 mm (2.52 in) H × 24 mm (0.94 in) D, 300 g (10.58 oz)
    Included accessories Test head ×1, Connection cable ×1, Instruction manual ×1, LCR application disc (Communications user manual) ×1, Power cord ×1
Yes! I am interested

Hioki IM7585 Impedance Analyzer

Get Best Quote
  • Foil Print
Request Callback

₹ 2150000 / Piece Get Latest Price

Product Brochure
Usage/ApplicationLaboratory Use
Model Name/NumberIM7585
BrandHIOKI
Measurement frequency1.3 GHz
Display8.4-inch color TFT with touch screen
Dimensions215x200x384 mm
InterfacesUSB communication
Measurement modesLCR Mode

Minimum order quantity: 1 Piece

Hioki LCR Meters and Impedance Analyzers range from 1 mHz to 3 GHz devices to suit a wide range of applications in the testing of electronic components. The IM7585 Impedance Analyzer offers a top measurement time of 0.5 ms over a 1 MHz to 1.3 GHz frequency range and superior stability, making it ideal for R&D as well as high volume production of ferrite chip beads and chip inductors.
  • 1 MHz to 1.3 GHz testing source frequency
  • Fastest test speed of 0.5 msec (Analog measurement time)
  • 0.07% measured value variability (when measuring at 1GHz)
  • ±0.65% rdg. basic accuracy
  • RF I-V method
  • Half-rack size body and palm-sized test head
  • Comprehensive contact check (via DCR testing, Hi-Z reject or waveform judgment)
  • Make frequency sweeps, level sweeps and time interval measurements in Analyzer Mode
Yes! I am interested

Hioki IM7580A Impedance Analyzer

Get Best Quote
  • Foil Print
Request Callback

₹ 1350000 / Piece Get Latest Price

Product Brochure
Usage/ApplicationLaboratory Use
Measurement modesLCR mode
Measurable range100
Display8.4-inch color
Power supply240 V AC
Dimensions215x200x268 mm

Minimum order quantity: 1 Piece

Hioki LCR Meters and Impedance Analyzers range from 1 mHz to 3 GHz devices to suit a wide range of applications in the testing of electronic components. The IM7580A impedance analyzer offers a top measurement time of 0.5 ms over a 1 MHz to 300 MHz frequency, and both LCR and Analyzer Modes to meet applications for both high volume production inspections and research and development.
Yes! I am interested

Hioki IM7581 Impedance Analyzer

Get Best Quote
  • Foil Print
Request Callback

₹ 1600000 / Piece Get Latest Price

Product Brochure
Usage/ApplicationLaboratory Use
Model Name/NumberIM7581
Measurement ModesLCR Mode
Measurable range100
Measurement frequency100.00 kHz
Power supply240 V

Minimum order quantity: 1 Piece

Hioki LCR Meters and Impedance Analyzers range from 1 mHz to 3 GHz devices to suit a wide range of applications in the testing of electronic components. The IM7581 offers a top measurement time of 0.5 ms over a 100 kHz to 300 MHz frequency range, making it ideal for high volume production of ferrite chip beads and chip inductors.
Yes! I am interested

Hioki 3504 HiTester

Get Best Quote
Request Callback

₹ 450000 / Piece Get Latest Price

Product Brochure
FunctionsPrint | Scan | Copy | Fax
Print Speed16 ppm
TechnologyLaser
ConnectivityUSB
UsageFor Home | Office
Usage/ApplicationIndustrial
BrandHIOKI
Model Name/Number3504
Color outputBlack & White
Paper sizeB5
Print speed40-60 ppm
Display TypeLED
Weight3.8 kg(134.0 oz)
Hioki LCR Meters and Impedance Analyzers range from 1mHz to 3GHz devices to suit a wide range of applications in the testing of electronic components. The 3504 series are dual-band capacitance meters suited for large-capacitance MLCC inspections using a constant voltage.
Yes! I am interested

Hioki IM9100 SMD Test Fixture

Get Best Quote
Request Callback

₹ 589000 / Piece Get Latest Price

Product Brochure
BrandHIOKI
Display TypeDigital
MaterialPlastic
Connecting sectionFour terminal type
Measurable sample sizesMetric 0402
Measurement frequency range8 MHz
Supported instrumentsIM3590, IM3570, IM3536, IM3533, IM3523, 3506-10 Legacy products: 3511-50, 3532-50, 3522-50
Included accessoriesInstruction manual x1, Short supplement jig (for all sizes) x1, Open supplement jig (for all sizes)

Minimum order quantity: 1 Piece

  • Hioki LCR Meters and Impedance Analyzers range from 1 mHz to 3 GHz devices to suit a wide range of applications in the testing of electronic components. The IM9100 is a 4-wire direct connection test fixture that supports testing of components in various sizes that are designed with electrodes on the bottom.
  • KEY FEATURES
  • Direct connection type
  • For measuring SMDs with electrodes on the bottom
  • DC to 8 MHz measurement frequency
  • Measurable sample sizes: Metric (Inch): 0402 (01005), 0603 (0201), 1005 (0402)
Yes! I am interested

Hioki IM9110 SMD Test Fixture

Get Best Quote
Request Callback

₹ 460000 / Piece Get Latest Price

Product Brochure
Tensile Strength80%
BrandHIOKI
Display TypeDigital
MaterialPlastic
Measurement frequency range1 MHZ
Supported instrumentsIM3590, IM3570, IM3536, IM3533, IM3533-01, IM3523, 3506-10 Legacy products: 3511-50, 3532-50, 3522-
Allowable input voltage / current42 V peak
Connection with sample2-terminal connection from opposite sides

Minimum order quantity: 1 Piece

Hioki LCR Meters and Impedance Analyzers range from 1mHz to 3GHz devices to suit a wide range of applications in the testing of electronic components. The IM9110 is a general-purpose SMD test fixture for the IM35xx series of LCR meter/Impedance analyzer that accommodates ultra-small components and delivers repeatable results.
  • Easily place samples via built-in cover that keeps the sample from popping out
  • Advanced contact technology delivers highly reproducible measurement results
Yes! I am interested

Hioki IM9202 Test Fixture

Get Best Quote
Request Callback

₹ 370000 / Piece Get Latest Price

Product Brochure
Tensile Strength80%
BrandHIOKI
Display TypeDigital
MaterialStainless Steel
Frequency range600 MHz
Supported unitsIM7580, IM7580A, IM7581, IM7583, IM7585, IM7587
Included accessoriesH-side lead component clip x1, L-side lead component electrode x1, L-side SMD electrode x1, SMD open

Minimum order quantity: 1 Piece

Hioki LCR Meters and Impedance Analyzers range from DC to 3 GHz devices to suit a wide range of applications in the testing of electronic components. The IM9202 Test Fixture supports high frequency testing up to 600 MHz when paired with the IM7580 Impedance Analyzer series, and delivers a unique staging mechanism that lets you validate components and devices in various shapes and sizes, including RFID and NFC chips.
KEY FEATURES
  • Test fixture for IMPEDANCE ANALYZER IM7580 Series
  • High frequency testing up to 600 MHz
  • Test the impedance of devices in a diverse range of shapes and sizes, including leaded/though-hole devices, SMD, and RFID and NFC chips
  • Aids in properly identifying self-resonance frequency (SRF) and equivalent series resistance (ESR) to validate component performance
Yes! I am interested

Hioki IM7587 Impedance Analyzer

Get Best Quote
  • Foil Print
Request Callback

₹ 2882134 / Piece Get Latest Price

Product Brochure
Usage/ApplicationLaboratory Use
Power Supply240 V
Dimension215x200x348 mm
Accuracy0.65%
ColorWhite
Display8.4 inch

Minimum order quantity: 1 Piece

1 MHz to 3 GHz Measurement Frequency Impedance Analyzer with 0.5 ms Test Speed and 0.07% Variability
  • 1 MHz to 3 GHz testing source frequency
  • Fastest test speed of 0.5 msec (Analog measurement time)
  • 0.07% measured value variability (When measuring a 1 nH coil at 3 GHz)
  • ±0.65% rdg. basic accuracy
  • RF I-V method
  • Half-rack size body and palm-sized test head
  • Comprehensive contact check (via DCR testing, Hi-Z reject or waveform judgment)
  • Make frequency sweeps, level sweeps and time interval measurements in Analyzer Mode
Measurement modes LCR mode, Analyzer mode (sweeps with measurement frequency and measurement level), Continuous measurement mode
Measurement parameters Z, Y, θ, Rs (ESR), Rp, X, G, B, Cs, Cp, Ls, Lp, D (tanδ), Q
Measurable range 100 mΩ to 5 kΩ
Display range Z: 0.00 m to 9.99999 GΩ / Rs, Rp, X: ± (0.00 m to 9.99999 GΩ)
Ls, Lp: ± (0.00000 n to 9.99999 GH) / Q: ± (0.00 to 9999.99)
θ: ± (0.000° to 180.000°), Cs, Cp: ± (0.00000 p to 9.99999 GF)
D: ± (0.00000 to 9.99999), Y: (0.000 n to 9.99999 GS)
G, B: ± (0.000 n to 9.99999 GS), Δ%: ± (0.000 % to 999.999 %)
Basic accuracy Z: ±0.65 % rdg. θ: ±0.38°
Measurement frequency 1 MHz to 3 GHz (100 kHz setting resolution)
Measurement signal level Power: -40.0 dBm to +1.0 dBm
Voltage: 4 mV to 502 mVrms
Current: 0.09 mA to 10.04 mArms
Output impedance 50 Ω (at 10 MHz)
Display 8.4-inch color TFT with touch screen
Measurement speeds FAST: 0.5 ms (Analog measurement time, typical value)
Functions Contact check, Comparator, BIN measurement (classification), Panel loading/saving, Memory function, Equivalent circuit analysis, Correlation compensation
Interfaces EXT I/O (Handler), USB communication, USB memory, LAN, RS-232C (optional), GP-IB (optional)
Power supply 100 to 240 V AC, 50/60 Hz, 70 VA max.
Dimensions and mass Main unit: 215 mm (8.46 in) W × 200 mm (7.87 in) H × 348 mm (13.70 in) D, 8.0 kg (282.2 oz)
Test head: 90 mm (3.54 in) W × 64 mm (2.52 in) H × 24 mm (0.94 in) D, 300 g (10.58 oz)
Included accessories Test head ×1, Connection cable ×1, Instruction manual ×1, LCR application disc (Communications user manual) ×1, Power cord ×1
Yes! I am interested

RM3548-50 Resistance Meter

Get Best Quote
Request Callback

₹ 98500 / Piece Get Latest Price

Power Supply5 VA max
Resistance range3 m
Testing current500 nA DC
Dimensions199x132x60 mm

Minimum order quantity: 1 Piece

The RM3548-50 is a precision handheld resistance meter measuring from 0.1 µΩ to 3.5 MΩ. It offers effortless operation and accuracy, making it ideal for EV maintenance, aircraft overhaul, and motor inspections.
Yes! I am interested
X

Product Videos

Hioki RM3545A Resistance Meter

Hioki RM3545A Resistance Meter

Get Quote
Hioki RM3544 Resistance Meter

Hioki RM3544 Resistance Meter

Get Quote
Hioki RM3548 Resistance Meter

Hioki RM3548 Resistance Meter

Get Quote

Contact Us

Shallu (Owner)
Amigos Scientific Solutions
Sn.19, Gali 7 Number School
Ambala - 134003, Haryana, India

Get Directions
Send Email
Share: